C920/C922/C930 enclosure kit for CS-type lens mk2

The new version of the C920 camera rework kit. It enables the use of C and CS-mount lenses with a consumer-grade USB webcam.

Key changes mk1 vs mk2:

• USB MINI was replaced with a USB-C connector with lock screws
• Easier to assembly
• Smaller
• Compatible with Arca Swiss plate
• Does not have integrated Tripod mount (should be used with optional mount plate)

C920 webcam still holding strong since the 2012 year. Though new models were released since:

• C920 - original webcam. A not long time ago Logitech dropped h.264 support
• C930 - should be used if h.264 is needed (this compression should be enabled for a while)
• C922 - another compatible camera

C920 family cameras produce good picture quality and can do real full HD streaming (1920×1080p @ 30fps). Also, these cameras are well known for good support for machine vision applications including OpenCV.

Included parts

• Aluminum case
  
• M2.5x8 screws x4
• M2x4 screw x2
• M1.6x4 screw x4
  
• USB board
• 2x Allen/hex keys (1.5mm and 2mm for included screws)
• Kynar wire
• Tripod mount plate kit is optional
  

Tool/material set required

• Logitech C920/C930 camera
• Soldering equipment
• Pliers
• Screwdrivers (PH00 or PH0) for original C920 screws
• Image sensor cleaning tools materials

Resources

• 3D model can be found at GitHub
• Rework instructions on the wiki